Scope of Delivery and Accessories
ZEP Clock RFID Terminal
Micro-USB power adapter 5V 2A for 230V connection
3m flat network cable for Ethernet operation
Wall mounting plate
User manual
Note: Images similar, subject to change.
For the operation of the terminal, you may need the following additional accessories:
RFID key fobs: available in packs of 10 including a metal ring, in various colors, dimensions approx. 40mm x 32mm x 4mm each
RFID cards: in credit-card size, available in packs of 10, dimensions approx. 86mm x 54mm x 1mm each
PoE adapter: for connection via Power over Ethernet (PoE) according to IEEE 802.3af, we offer an adapter with Micro-USB connector (input: Ethernet PoE 10/100 Mbit/s, output: 5V= 2A Micro-USB and RJ45 Ethernet 10/100 Mbit/s)
Wall mounting kit: for concealed wall mounting of the PoE adapter, a wall mounting kit is available consisting of a wall mounting plate with approx. 2.5cm depth and a 20cm network cable. This allows the PoE adapter to be accommodated behind the terminal when wall-mounted.
Flush-mounted power supply: for flush-mounted installation, we offer a suitable flush-mounted power supply with Micro-USB connector (input: 100-240V/50-60 Hz, output: 5V= 2.4A Micro-USB, installation and commissioning only by qualified electrical personnel according to DIN VDE 0100)
Note: You can reorder additional RFID key fobs and RFID cards (also called transponders or chips) from ZEP support at [email protected].
Prerequisites and Intended Use
The ZEP Terminal can be added in all product lines. You use it for time tracking via RFID key fob or card. In ZEP Clock, it is ready to use right away; in the other product lines, you also enable the setting Record attendances in addition to project times.
You need access to your ZEP at https://www.zep-online.de/zepXXX where XXX generally stands for your company name. Use of a terminal must be enabled in this ZEP instance. To operate the ZEP terminal you need a stable internet connection either via WLAN (2.4 GHz 802.11b/g/n, no PSK/EAP) or via Ethernet cable (DHCP or static IP, 10/100 Mbit/s) with direct access to https://www.zep-online.de, i.e. port 443 via SSL without a visible proxy server.
On delivery the ZEP Terminal is ready to use as a desktop device via WLAN without further assembly. It only requires a power outlet. A smartphone or laptop with WLAN is needed to configure the terminal. Operation is permitted exclusively within the EU.
All steps at a glance
Setting up a ZEP Terminal leads through these steps. The step you are currently on is shown without a link.
Scope of delivery, accessories and prerequisites – you are here