You can operate the terminal via WLAN or Ethernet cable and set it up as a desktop device or attach it to the wall. A Power over Ethernet (PoE) adapter and a flush-mounted power supply are available as optional accessories.

4.1 Desktop device with WLAN and power supply

When delivered, the device is prepared as a desktop device for WLAN operation. The power supply is already plugged into the terminal. You only need a power outlet at the installation location.

4.2 Desktop device with Ethernet cable and power supply

The connection for the included network cable can be found on the back of the device under the cover:

To remove the cover, use a Phillips screwdriver and open the screw on the bottom of the device.
Open the cover by swinging it backwards at the bottom.
Plug the included Ethernet cable into the back of the device.
Replace the cover and secure it with the screw.

4.3 Desktop device with Ethernet cable and optional PoE adapter

If there is no power connection available at your installation location, but your network has Power over Ethernet (PoE), you can optionally purchase an adapter from us that splits PoE Ethernet according to IEEE 802.3af into a micro USB port for power supply and an Ethernet port.

The connection for the PoE adapter can be found on the back of the device under the cover:

To remove the cover, use a Phillips screwdriver and open the screw on the bottom of the device.
Open the cover by swinging it backwards at the bottom.
Remove the power supply cable and instead connect the PoE adapter to the terminal using the micro USB cable and the Ethernet cable.
You can use the included Ethernet cable to connect the adapter to your PoE network.

4.4 Wall unit with WLAN or Ethernet cable and power supply

A wall mounting plate is included with the terminal for wall mounting. This replaces the rear cover of the terminal:

Attach the wall mounting plate to the wall using the screws and anchors provided.
Remove the back cover of the terminal by using a Phillips screwdriver to remove the screw on the bottom of the device.
Open the cover by swinging it backwards at the bottom.
If necessary, connect the Ethernet cable and first hang the terminal on the top of the wall mounting plate and then swing it onto the wall.
Fix the device from the bottom using the screw.

ZEP Clock: Terminal